PIK
GUN MODERN
q
Replacing the aluminium tube
remove the motor housing
unscrew the nozzle and
Hold the motor with spanner
loosen the motor housing
11mm and 7mm to loosen
the aluminium tube
apply some Loctite
blow out the motor housing
Tighten the aluminium tube with
before mounting the new
on both sides with air.
11 mm and 7 mm spanner.
aluminium tube.
screw on the muffer and washer.
screw on the motor housing.
Tighten the nozzle.
14
Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu