Bosch PHA 5363 Gebrauchsanleitung Seite 10

en
Congratulations on purchasing this
Bosch appliance.
You have acquired a high-quality
product that you will no doubt enjoy
using.
Controls and accessories
1 Ring switch ON / OFF
3 Temperature / Fan settings
2 Ionisation switch
3 LED ionisation light strip
4 Release button
3
5 Cool button
6 Air inlet grill
7 Hanging eyelet
8 Volume brush Ø 38
9 Round brush Ø 20 with natural bristles
Use
■ Never cover the fan or air inlet.
■ Make sure that the air inlet is free of lint
and hair.
■ The hot air styling brush will switch off
automatically if it overheats due to, for
example, the inlet being covered. It will
switch back on after a few minutes.
Attach all accessories at the marking
lock into place by rotating to ▼.
To change accessories, press
the release button 4 and
remove the part by turning it
anti-clockwise.
8
Brush attachment
Select and attach a brush to suit hair length
and desired hairstyle. Take a small section
of towel-dried hair and turn up from the tip
to a curl.
Set the ring switch 1 to setting 1
(gentle / warm air), setting 2 (strong / medium
heat) or setting 3 (strong / hot air) and dry
the hair section with the warm air.
Switch to the cool setting
help it hold its shape.
Tip: Allow hair to completely cool off before
combing; your hair style will then hold its
shape for longer.
For more information on Bosch styling, visit
www.bosch-personalstyle.com
Ionisation
This hot-air styling brush comes with
Quattro-Ion Technology (4 ion outlets) with
Shine Boost Power. Ions are electrically
loaded particles that exist in the air, which
are created by an ion generator in the appli-
ance. Thanks to the quadruple ionisation
●
and
of the Quattro-Ion Hot-Air Styling Brush
with its extra-wide ion current, the static
charging, i. e. the frizzing of hair, is visibly
reduced (anti-static effect). The result:
noticeably softer hair that is easier to comb
and has an intensive, silky shine. The ion-
isation can be switched on/off with button
2 at any temperature /fan setting. The LED
light strip 3 lights up red as soon as the
ionisation is switched on.
3
to fix the curl to