Electrical Installation; Environment Concerns - Novamatic FH67-412K Benutzerinformation

Electrical installation

The manufacturer is not responsible if
you do not follow safety precautions
from the chapter "Safety information".
This appliance is supplied without a main
plug and a main cable.
Applicable cable type: H05 RR-F with ade-
quate cross-section.
Warning! Before you connect the
mains cable to the terminal, measure

ENVIRONMENT CONCERNS

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
80-85
mm
317-
322 mm
How to install the anti-tilt protection
1. Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
2. Make sure that the surface behind the
appliance is smooth.
3. Install the anti-tilt protection 317-322
mm down from the top surface of the
appliance and 80-85 mm from the side
of the appliance into the circular hole
on a bracket. Screw it into the solid
material or use applicable reinforce-
ment (wall).
4. You can find the hole on the left side at
the back of the appliance. See the illus-
tration.
5. If you changed the dimensions of the
cooker, you must align the non-tip de-
vice correctly.
Important! If the space between the
bench cupboards is larger than the width of
the appliance, you must adjust the side
measurement to center the appliance.
the voltage between phases in the
house network.
Then, refer to the connection label at
the back of the appliance to use the
correct electrical installation
This order of steps prevents from in-
stallation errors and damage to the
electrical components of the appliance.
The power cable must not touch the
part of the appliance shown in the illus-
tration.
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
17