16
Location of the appliance
A
You can install your freestanding appliance
with cabinets on one or two sides and in
the corner.
Minimum distances
Dimension
A
Anti-tilt protection
B
mm
690
Dimension
B
Technical Data
Dimensions
Height
Width
Depth
Levelling
Use small feet on the bottom of appliance
to set the appliance top surface level with
other surfaces.
Warning! You must install the anti-tilt
protection. Install the anti-tilt protection
to prevent the appliance to fall with in-
correct loads.
Warning! Your appliance has the sym-
bol shown on the picture (if applicable)
to remind you about the installation of
the anti-tilt protection.
Important! Make sure you install the anti-
tilt protection at the correct height.
mm
150
855 mm
500 mm
600 mm