Shelf Support; Cleaning The Oven Door - Novamatic FH67-412K Benutzerinformation

12
• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories (with a soft
cloth with warm water and cleaning
agent) after each use and let them dry.

Shelf support

1
2
Installing the shelf support
Install the shelf support in the sequence op-
posite to its removal.
Stainless steel or aluminium appli-
ances:
Clean the oven door with a wet sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abra-
sive materials as they can damage the
oven surface. Clean the oven control
panel with the same precautions

Cleaning the oven door

The oven door has two panels of glass in-
stalled one behind the other. To make the
cleaning easier remove the oven door.
Removing the oven door and the glass panel
• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It
can destroy nonstick coating!
You can remove the shelf support to clean
the side walls.
Removing the shelf support
1. Pull the front of the shelf support away
from the side wall.
2. Pull out the shelf support from the
back of the side wall and remove it.
Warning! The oven door can close if
you try to remove the internal panel of
glass when the door is still assembled.
Warning! Make sure that the glass
panels are cool, before you clean the
glass door. There is risk that the glass
breaks.
Warning! When the door glass panels
are damaged or have scratches, the
glass becomes weak and can break.
To prevent this you must replace them.
For more instructions, contact your
local Service Centre.
1. Open the door fully and hold the two
door hinges.