First Use; Camera Settings - Dorr 12 MP Bedienungsanleitung

06 |

FIRST USE

1. Open the camera releasing the lateral tension locks (5).
2. Make sure that the slide control (12) is on OFF position.
CAUTION: To avoid camera damages always make sure that camera is switched o (12=OFF) when inserting batteries or changing SD card.
3. Insert 8 x AA/1,5V batteries (optional) into the battery compartment (17). Respect correct polarity (+/-).
CAUTION: Do not use re-chargeable batteries. They may lead to malfunction.
4. Insert a SD card (optional) with the label facing upwards into the SD card slot (16).
Make sure that the SD card is unlocked.
5. Move the slide control (12) to SETUP position.
The LCD display (8) shows the basic settings:
Camera symbol
5M
Battery symbol
00000/00000m
00000/00000m
07 |

CAMERA SETTINGS

Your camera is pre-set as follows:
MODE
PHOTO SIZE
PHOTO NO (NUMBER OF PHOTOS)
PIR INTERVAL
After having inserted the batteries and the memory card and after the date and time setting (refer to capture 08), the camera is ready for instant
use with the pre-settings. Simply move the slide control (12) to position ON.
In case you wish to change the pre-settings, move the slide control (12) to position SETUP and press the MENU button (9). The LCD display (8)
shows a list with the various menu settings.
Press the arrow buttons (10) or to select the menu item. The selected menu item is marked with a yellow background.
•
Press the OK button (11) to edit the menu item.
•
Select the desired setting using the arrow buttons (10) / /
•
To save your settings press the OK button (11). You will automatically get back to main menu.
•
Press the MENU button (9) to get back to the start screen.
•
Single picture mode
Resolution 5 Mega Pixels
Battery status
Stored pictures/free capacity
Photo
5 MP
1 photo
5 seconds
/ .
17