Led Indicators; Connectors And Buttons - Axis Q3505-VE Installationsanleitung

AXIS Q3505–VE Fixed Dome Network Camera
16. Status Led
17. Function button
18. Spring in unit casing
19. Heater Caution!

LED Indicators

LED
Color
Status Unlit
Amber
Amber/red
Red
Green
Note
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance .
Status LED Behavior and Buzzer Signal for Levelling Assistant
For information on the Function button used for levelling the image, see Connectors and Buttons.
Color
Fixed green
Flashing green
Flashing orange
Flashing red

Connectors and Buttons

For specifications and operating conditions, see page 14.
Caution! The heater may be hot
Caution!
Indication
Connection and normal operation
Steady during startup. Flashes during firmware upgrade.
Flashes amber/red if network connection is unavailable
or lost.
Flashes red for firmware upgrade failure.
Shows steady green for 10 seconds for normal operation
after restart.
Buzzer
Continuous beep
Fast interval
Medium interval
Slow interval
Camera position
Level
Almost level
Not level
Far from level
11