Cleaning And Care; Troubleshooting - Klarstein Hot Spot Wave Handbuch

CLEANING AND CARE

• Please switch off the heater, unplug the power cord and allow the heater to cool
down before cleaning.
• Do not immerse the power cord and plug or the heater into water or other liquid.
Do not pour water or other liquid over the heater.
• Use a vacuum cleaner to remove dust and lint from the metal grid of the heater.
• Wipe the heater with a dry cloth to remove dust and a damp cloth (not wet) to
clean the stains.
• Do not use detergents, abrasive cleaning powder or polish of any kind on the body
of the heater, as these can damage the finish.
Storage
Store the heater in a cool dry place when not in use. To prevent dust and dirt getting into
the heater, use the original box to repack the unit.

TROUBLESHOOTING

If the towel warmer does not heat or turn on, check the following:
• Check if the electrical supply in the house or the main fuse is working or not.
• Check if the power cord is plugged into an electrical outlet or not.
• Check if the heater is switched on or not.
• Check if the room temperature is under thermostat setting temperature or not.
• Check if any objects are covering the unit or not.
If the heater is still not operation after these checking, please contact the
manufacturer service agent. All repairs must be referred to authorized personnel
from authorized retailer. Any tampering with the appliance will invalidate the
warranty. Repairs carried out improperly and by unqualified persons may have
serious consequences for the user.
EN
21