Chapter 4: Setting Up And Connecting The Wireless-G Notebook Adapter; Starting The Setup; Figure 4-1: Setup Wizard's Welcome Screen - Cisco Systems Linksys WPC54GS Benutzerhandbuch

Wireless-G Notebook Adapter or Wirless-G Notebook Adapter with SpeedBooster
Chapter 4: Setting up and Connecting the Wireless-G
Notebook Adapter

Starting the Setup

The Wireless-G Notebook Adapter Setup Wizard will guide you through the installation procedure. The Setup
Wizard will install the driver and Wireless Network Monitor, as well as connect and configure the Adapter.
IMPORTANT: Do not connect the Adapter until you are instructed to
do so or the setup will not work.
Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that appears,
enter D:\setup.exe (if "D" is the letter of your CD-ROM drive).
On the initial Welcome screen, the language of your computer's operating system is selected. Click Next to
proceed in the current language. To use a different language, select it from the Language drop-down menu, and
then click Next.

Chapter 4: Setting up and Connecting the Wireless-G Notebook Adapter

Starting the Setup

Figure 4-1: Setup Wizard's Welcome Screen

5