Quer CRUISER ZAB0010.1 Bedienungsanleitung Seite 15

Step 1: Set the vehicle on flat and stable surface. Press the power
button to turn it on. The vehicle can face either direction. The battery
indicator on the top of the device will turn green.
Step 2: Step your dominant foot on the platform. The operation
indicator will turn green. Use the foot to level the platform and activate
the balancing system. The balancing system will not activate until the
platform is level.
Step 3: Then step on the other foot. You're ready to drive!
Note: once the user steps up on the vehicle, the white and red
LED lamps will be on, and they will flash when the vehicle turns
right or left.
Step 4: Lean forward to move forward/speed up; lean back to move
backwards/slow down. Remember not to make sudden moves.
Note: do not drive when the operation indicator turns red. Red operation indicator
signalizes an error or a fault in operation.
Step 5: Move the right foot slightly forward to turn left; move the left foot slightly forward
to turn right.
Step 6: When you are ready to get off, slow down, stop the device and step off with one
foot first, then the other foot. When getting off, make sure the device is still. Press the
power button to turn the vehicle off.
Note: If you don't switch device off, it will stay on for 10 minutes allowing you to
step on it and continue riding without engaging on/off switch. If not used within that
period, it will automatically switch off after the 10 minutes are up.
Owner's manual
Operation steps:
EN
15