tepro Bluefield Bedienungsanleitung Seite 33

Screw in the screw (a) up to half the
length into the upper end of the bottom
stand tube (11).
Place the decorative ring (10) between
the upper (9) and bottom (11) stand
tubes.
Screw both tubes using the screw (a)
firmly together.
Insert the bottom end of the stand tube
(11) into the stand foot base (12).
GB
Screw in the screw (b) into the stand
tube (9) at the level, where the cooling
tray (8) should be placed.
Put the upper end of the stand tube (9)
through the cooling tray (8).
Put the grill holder (7) onto the upper end
of the stand tube (9).
The grill stand is now assembled.
Please note: The grill can also be used
without this stand as a table-top grill.
33