Wired Network Setting - Legamaster e-SCREEN ETX Kurzanleitung Zur Installation

12. WIRED NETWORK SETTING

There are two ways to set up wired network: Easy Setup Wizard, Advanced mode.
Select Gateway
Next
Finished
(Internal router)
Select
Easy Setup
Wizard
Password Setting Format
WiFi Password of Internal
Router in the screen
(Password should be set at
least 8 characters.)
Get IP address
Setting successfully
Input the default UserName: admin,
skip the default password setting as
there is no default password and then
press login button.
There are five methods to connect with
network, choose your preferred option.
Recommended to select the DHCP
Client connection. Automatically obtain
IP information from your ISP.
DHCP Client: Automatically obtain IP
information from your ISP. If your ISP
doesn't provide a designated IP for you,
then choose DHCP Client.
Static IP: If all Internet IP information is
provided by your ISP, then choose Static
IP.
PPPOE: Ethernet Point to Protocol.
Your ISP will provide you with Login
ID and password. Usually this option is
applicable to DSL service.
PPTP: Point to Point Tunneling Protocol.
Your ISP will provide you with Login ID
and password.
L2TP: Layer 2 Tunneling Protocol.
Your ISP will provide you with Login
ID and password. Usually this option is
applicable to DSL service.
e-Screen ETX – QUICK START GUIDE – ENGLISH
9