Salda Stouch Bedienungsanleitung Seite 30

EN
No.
P.01
P.02
Supply air temperature display 0: Not shown
P.03
P.04
P.05
P.06
Intended use
1) 1) Modbus maste
This controller can control other devices (controlled by MODBUS protocol). This can be set in service menu by
selecting required parameters for service menu items F.17, F.18, F.19, F.20, F.21. To control not only standard
devices, select "CUSTOM" in menu item F.20 and device addresses in menu items from F.22 up to F.37. If
devices have no such addresses, in fi elds of given menu items enter "00:00". Normally, this controller is used
with ECO or PRV control boards.
2) Modbus slave
Using BMS (Building Management System), several devices can be controlled simultaneously or one device
can be controlled using several controllers. MODBUS protocol allows changing all parameters of controllers and
monitoring data of connected sensors.
(slave)
30
Name Possible values
Sleep mode
Sound
CO2 required (ppm) 0 – 99 x10ppm
CO2 allowed difference 0 – 99 x10ppm
Filtrer timer 0 – 999 days
ster (main)
CONTROLLER
(master)
AHU AHU
(slave)
0 - Off
1 - 99 sleeping time in seconds
0: Off
1: 1 –9 sound tone
1: Shown interchangeably with the set temp
MODBUS
AHU
(slave)
BMS
CONTROLLER
(slave)
CONTROLLER
(slave)
www.salda.lt
Default
value
0
2
0
20 x10
5 x 10
0