Kessel Pumpfix Anleitung Für Einbau, Betrieb Und Wartung Seite 39

The cables of the pumps or the optical probes can be lengthened or shortened. See chapter 6.1 Shortening or
lengthening the motor / sensor cable
• Connect the plug for the wastewater pump's cable connection to
connection <4>
• Connect the level sensor's plug (optical probe, to switch on the
wastewater pump on the house side) to connection <1>
• Connect the plug of the backwater flap's motor drive to the
connection <2>
• Connect the backwater sensor's plug (optical probe to determine
the alarm level in the direction of the wastewater duct) to the
connection <3>
Assignment of the connecting cable, see Fig. [10] (Pumpfix) or Fig. [11]
(Ecolift)
2017/01
Installation
39 / 168
1 2 3
4
fig. [9]