Olivetti LOGOS 912 Bedienungsanleitung Seite 17

Transport safety device removal
Before plugging in the AC cord and switching on the calculator, check that the rated
voltage indicated on the rating label on the bottom corresponds to the local voltage, and
remove the ribbon-cushion placed over the ribbon spool.
Ribbon cushion is located under the
printer cover.
Replacing ribbon spool
1. Remove printer cover.
2. Move spool holder to remove both spools.
3. Insert new spools, making sure that black
side of ribbon is face up, that the ribbon is
threaded through the ribbon guide, and
that it winds in the right direction.
Loading paper
1. Plug in the calculator and turn it on.
2. Cut, or tear evenly, the end of the paper roll
to get a straight, even edge for proper
feeding under the print head.
3. Holding the paper roll in one hand, feed the
paper from the bottom of the roll and insert
the paper slot at the back of the calculator.
4. Press paper feed key until the paper
catches and advances through the printer.
5. Fit the paper roll between the pair of paper holders.
ENGLISH
Correct
Pull from here
Incorrect
1