Electrical Safety; Personal Safety; General Power Tool Safety Warnings - Bosch GSR 18-2-LI Professional Originalbetriebsanleitung

OBJ_BUCH-1886-003.book Page 8 Monday, September 12, 2016 4:03 PM
8
Nur für EU-Länder:
Deutschland
Schweiz
Akkus/Batterien:
Li-Ion:
Änderungen vorbehalten.
English

General Power Tool Safety Warnings

Read all safety warnings and all in-
WARNING
structions.
Save all warnings and instructions for future reference.
Work area safety
Keep work area clean and well lit.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust.
Keep children and bystanders away while operating a
power tool.

Electrical safety

Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
Do not expose power tools to rain or wet conditions.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply.

Personal safety

Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication.
Use personal protective equipment. Always wear eye
protection.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Remove any adjusting key or wrench before turning
the power tool on.
Do not overreach. Keep proper footing and balance at
all times.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used.