auna MVD-480 Bedienungsanleitung Seite 19

Remote Comrol Sensor (IR)
Press POWER ON/OFF CONTROL (2) to turn on the unit (when the unit is power off).
POWER ON/OFF
Press and hold (!) (2) for two seconds to turn off the unit. All the memorized setting will
CONTROL
retain after the unit turned off.
VOLUME CON- During unit operation, rotate VOLUME CONTROL (2) clockwise or anti-clockwise to adjust
the sound output.
TROL
During unit operation, press VOLUME CONTROL shortly to cut down the sound output,
MUTE
press it again to release the mode and recover to the previous volume level.
Using the remote control handset to operate different functions of the unit by pointing the
REMOTE CON-
remote control handset to the remote control sensor IR and press the control key on the
TROL SENSOR
remote control handset for operation.
The TFT SCREEN (10) shows the status of operation on the unit. This display is also a touch screen
display - soft touch the TFT screen for different operations of unit (for details,
TFT DISPLAY:
please refer to other parts of this operation manual).
To insert a disc, put it into the DISC SLOT (5), the unit will automatically insert the disc into the
DISC INSERT /
mechanism and start playing. To eject the disc, press A (6) and disc will automatically
EJECT
come out from the DISC SLOT .
Insert USB device to USB SLOT (7) for playback of multi-media files that recorded in the
USB SLOT
device.
Insert micro SD card to MICRO SD CARD SLOT (8) for playback of multi-media files that
MICRO SD CARD
recorded in the card.
PORT
During unit operation, press DVD to shift the unit from the current mode to disc operation mode
DVD
(when a disc inserted).
The MIC (9) is for voice reception under BT operation (for details of BT
MICROPHONE
operation, please refer to other parts of this operation manual).
During disc/USB/SD/iPod input playback mode, press  shortly to choose
track upward or downward for playback. Press and hold  for two
seconds will activate fast forward/rewind of the track. Press and hold one time for x2, press
SEEK+/-
and hold two times for x4, press and hold three times for x8, press and hold four times for
x20. Press and hold five times to resume to normal playback.
During unit operation, press MENU (17) to activate the main menu interface shown on TFT
SCREEN (17) for different operation modes selection (for details operation, please refer to
MENU
other parts of this operation manual).
Power On/Off
1
Disc Slot 2
Disc Eject
3
USB Slot
4
RES (Reset)
5
SEEK+/-
6
DVD
7
BAND 8
TUNING
9
10
Basic functions
TFT Screen
11
12 USB Slot
Volume Control (VOL+ / VOL-)
13
Sel Control ( SEL)
14
EQ Control
15
MUTE
16
MENU
17
18 Microphone for BT (MIC)
Mini SO Card Port
19
19