Installation - auna MVD-480 Bedienungsanleitung

• The unit is designed for DC 12V negative ground operation system only. Before installing the unit, make sure
your vehicle is connected to DC 12V negative ground electrical system.The negative battery terminal must be
disconnected before making connections. By doing so, it can reduce the chance of damaging the unit to short
circuit.
• Be sure to connect the colour coded leads correctly accordingly to the wiring diagram.
• Incorrect connections may cause the unit malfunction or damage the vehicle's electrical system.
• Be sure to connect the speaker(-) leads to the speaker(-) terminal. Never connect the left and right channel
speaker wires together or to the vehicle body.
• Do not block vents or radiator panels o f the unit. Blocking them will cause heat to build up inside the unit and
may cause damage or fire.
• After the completion o f installation (or after replacing the battery of vehicle), make sure to press the RESET but-
ton on the main unit with pointed object (such as ball-point pen) to set the unit to its initial status.
Installation varies on type of cars and supplied parts Store small articles in places not accessible to children Install
only with the supplied screws Installation of unit by professional technician is strongly recommended.
Safety and Installation Hints

Installation

16