Fail Safe Function Setting; Binding The Transmitter And Receiver - Carson Reflex Wheel-X Betriebsanleitung

Fail Safe function setting

1. Set the TH, ST switches to the normal position.
2. Turn on the transmitter and receiver.
3. Press the F/S SET button, the LED on the receiver
should start flashing rapidly.
GB

Binding the transmitter and receiver

1. Turn on the receiver power.
Press the SW switch. The
receiver's LED should start
flashing.
20 CARSON Reflex Wheel-X 2.4 GHz 50 050 0030
4. Put the throttle trigger at the brake position,
press the F/S SET button, the LED should become
solid.
5. For electric model, put the throttle trigger at the
stop position when you are making the setting.
2. Turn on the
transmitter.
3. When the LED on the
receiver becomes solid,
the binding process is
completed.