Sharp CS-4194HC Bedienungsanleitung Seite 8

GT
GRAND TOTAL MODE SELECTOR:
"GT": This selector will accumulate the
following:
✱
(" " will be printed.)
1. Addition and subtraction totals
obtained with
2. Product and quotient totals
obtained with
3. Results obtained using
"•": Neutral
PAPER FEED KEY
LAST DIGIT CORRECTION KEY
CHANGE SIGN KEY:
Changes the algebraic sign of a
number (i.e. positive to negative or
negative to positive).
NON-ADD / SUBTOTAL KEY:
Non-Add – When this key is pressed
right after entry of a
number in the Print mode,
the entry is printed on the
left-hand side with "#".
This key is used to print
out numbers not subject to
.
or .
.
6
calculations
codes, dates, etc.
Subtotal – Used to get subtotal(s) of
additions and/or subtrac-
tions. When
following
subtotal is printed with "◊"
and the calculation may be
continued.
By pressing this key even in the
Non-print mode, the displayed
number is printed without any
symbol.
TOTAL KEY:
Prints the total of addition and
subtraction with " ✱ ".
This key also serves as a clear key for
the calculation register and resets an
error condition.
CLEAR ENTRY KEY:
Clears numbers entered prior to use of
a function key.
Also used to clear an overflow error
caused by an entry.
such as
pressed
or , the