Configure The Repeater In The Web Management Tool - Velleman WIFIR3 Bedienungsanleitung

o In Subnet Mask, type 255.255.255.0.
o In Default Gateway, type the IP Address of your wireless
router (default address is 192.168.10.1).
5. Click OK to confirm.
You can now access the repeater from your computer.
7.3

Configure the repeater in the web management tool

1. Plug the repeater to a wall socket.
2. Connect your computer and the repeater with the included RJ-45
network cable.
3.
Log on to your computer.
4. Open your web browser and type the address
http:// 192.168.10.1.
This will open the configuration page of the repeater.
If the page does not open, reset the repeater (see section 12)
and retry.
V. 01 – 22/08/2013
WIFIR3
7 ©Velleman nv