Velleman WIFIR3 Bedienungsanleitung Seite 10

10. Wait until the repeater has rebooted.
Now you need to make sure the SSID (network name) is set
correctly in the Wireless Basic Settings of the tool.
11. In the menu, click the folder Wireless, then click Basic
Settings.
12. Check if the network name is correct. The name is used in two
fields:
o SSID of Wireless AP
o SSID of Extended Interface
V. 01 – 22/08/2013
WIFIR3
10 ©Velleman nv