Firmware-Upgrade - Velleman WIFIR3 Bedienungsanleitung

2. In Select SSID, you can select:
Root Client–XXXX
Repeater AP –
WiFi-Repeater1
Reset, backup and restore
You can back up the settings of the repeater for security reasons.
Also, if you use the device in different settings, you can easily save
and reload the different settings.
1.
Log on to the management tool and select
Save/Reload Settings.
• To make a backup file of the current settings, click the Save
button and choose a location for the settings file. You can save as
many setting files as you need.
• To upload previously saved settings, click the Browse button and
select the saved settings file on your computer. Next, click the
Upload button to load the settings. The current settings will be
replaced with the settings in the file that you loaded.
• To remove all the configuration settings you have made and reset
the device to the factory defaults, click the Reset button.
Firmware upgrade
To upgrade the firmware of your repeater, proceed as follows:
1. Download the new firmware from our website to your computer.
2. Log on to the management tool and choose
Management > Upgrade Firmware.
V. 01 – 22/08/2013
WIFIR3
The password of the repeater is the same as the
password of your XXXX router.
Select this option to set up a password for the
WiFi repeater.
17 ©Velleman nv