Medion LIFE X14020 Kurzanleitung Seite 92

TV switches off
No reception/poor reception
via a wireless network
connection (WLAN).
WIRELESS DISPLAY cannot
be established.
The remote control is not
working.
Menu cannot be opened.
No Bluetooth® connection
For further information on troubleshooting, read where applicable the comprehensive
operating instructions available online because certain measures and procedures are
described there in more detail.
• Check whether the automatic TV switch off function is
activated under
MORE...
• Ensure that all necessary settings have been made.
• Check that all necessary settings have been made. Read the
section "Wireless Display".
• Check whether the batteries in the remote control are
functional and have been inserted the right way round.
• Ensure the sensor field is not exposed to strong light.
• Turn the device off and on again using the power switch on
the bottom of the device.
• Check whether CEC is enabled. In this case, the menu cannot
be opened. This is not a defect. In some cases, the menu of the
device connected via HDMI2 opens. This is dependent on the
source device and must be supported accordingly.
• Change the input source.
• Make sure that all settings have been correctly specified on
the device and that the Bluetooth® function is enabled.
• Check whether the device to be connected is switched on and
is in discoverable mode.
• Make sure that all settings have been correctly specified
on the device to be connected and that the Bluetooth®
function is enabled. Consult the operating instructions of the
corresponding device, if necessary.
EN
15