Medion LIFE X14020 Kurzanleitung Seite 89

NETWORK Here you select the network type:
TYPE
After making a selection
confirming with the
appears. Make a selection and confirm with the
required for a network, a virtual keyboard appears which you can use to enter
this with the help of the direction buttons  and the
After entering the password, select
O K
PRESS WPS This option enables you to quickly establish a WPS connection via a wireless
ON YOUR WI-
network (Wi-Fi). Hold down the WPS button on your router and confirm this
FI ROUTER
option
(only for WLAN)
INTERNET
Press the
SPEED TEST
ADVANCED Press the
SETTINGS
CONFIGURATION
CONFIGURATION
WAKE ON Activate/deactivate the Wake-On LAN/Wake-On Wireless LAN function (WoL/
WoWLAN). This enables you to switch on the smart TV via a different device
(e.g. a smartphone with the MEDION® Life Remote App). Both devices must
be connected to the same network via LAN or Wi-Fi for this purpose. Select
the
control needs to be connected to the TV once when it is switched on. The
control function only works when the TV is in standby mode. If the TV is
turned off and on again at the mains switch, the connection between the two
devices will be automatically restored.
 Exit the network settings by pressing
12
Network settings
NEXT
O K
button, an overview of all available networks
button.
O K
using the button. Then the WPS connection will be made.
OK
O K
button in order to test the Internet speed.
O K button to call up further network configuration options.
Choose the setting
you select
in which you can manually enter the data for the
ADRESS, SUBNET MASK
using the direction buttons  and the number
buttons.
Select here between
DNS
appear in which you can manually enter the data for
the
DNS SERVER 1
direction buttons  and the number buttons.
An existing network connection can be terminated by pressing
the red button.
setting to activate this function. The device being used as a remote
ON
O K
.
WIRELESS DEVICE
with the direction buttons  and
O K
on the keyboard and confirm with the
OK
AUTOMATIC IP
, three additional lines appear
MANUAL IP
and
AUTOMATIC DNS
. If you select
MANUAL DNS
and
DNS SERVER 2
or .
WIRED DEVICE
button. If a password is
O K button.
or . If
MANUAL IP
IP
DEFAULT GATEWAY
or
MANUAL
, two additional lines
using the