Using The Device For The First Time; Unpacking; Mounting - Medion LIFE X14020 Kurzanleitung

2.3.1. Programming the multifunction buttons
1 2
The and buttons can be programmed to any channel position or a particular input source
 Start by selecting the function you require and then hold down the corresponding button for 5
seconds until
MY BUTTON IS SET
After each
INITIAL INSTALLATION
deleted and reset to the factory defaults
3. Using the device for the fi rst time
Before using for the first time, be sure to read the section "Safety instructions".

3.1. Unpacking

• Select a suitable place for setting up the device before unpacking.
• Open the box very carefully to avoid damaging the device. The device could be damaged if you
use a knife with a long blade to open the box.
• The box contains a number of small items (including batteries). Keep these out of the reach of
children as they represent a choking hazard.
• Store the packaging material in a safe place; only use this box to transport the TV.
DANGER!
Risk of suffocation!
Packaging film can be swallowed or used improperly. Therefore, there is a risk of
suffocation!
 Keep packaging material such as plastic film or plastic bags away from children.

3.2. Mounting

Attach the stand as shown in the illustration. Carry out this step before connecting the smart TV.
MD31421 / MD31422 / MD31423:
1
3
8
appears on the screen. This confirms the new programming.
your customised button programming is
2
4
1
and 2