Sparco Corsa SPC F1000KI Bedienungsanleitung Seite 15

Group I Car Belt Installation
2.3 Group I Car Belt Installation
（For Children weight between 9-18KG）
Pull the car belt through guide slot and insert belt buckle
into front side cover hole(picture 1), then across seat
back and took out from the other side of cover hole
(picture 2) , finally buckle up until heard"click"sound.
(picture 3)
Please make sure car belt should be through red guide
slot at the top of seat back and red waist belt guide without
no twist. After installation, tighten car belt as arrow
indicator direction. (picture 4 )
Pull the harness strap as far as you can, and open safety
buckle of car seat, then put children inside 5-point
harness
heard"click"sound. (picture 5)
Watch your children's feeling, adjust suitable harness
tightness by pulling adjusting strap and adjust headrest to
right height.（picture 6）
1
4
system and
click
5
click
joint buckle
GB
CZ
DE
3
6
clips until
15