Eberle E200 Installationsanleitung Seite 48

The controller is now installed and will automatically start to control the room temperature accord-
ing to the pre-set program 1 (refer to User Guide).
All important functions are set ex-factory. If you wish to change any of the settings, please refer to
the options in the User Guide.
According to the heating type, refer to item 3.10 (option 11).
Fig. 1
48
L N
Fig. 2
H
C
H = Heating, actuators normally closed
C = Heating, actuators normally open or cooling only
C
RELAY
On
Off