Multifunction Button - Hama Speed Bedienungsanleitung

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new
owner.
Controls and Displays
1. Volume up
2. Volume down
3. EQ button

4. Multifunction button

5. Track back
6. Track forward
7. Indicator lights
8. Microphone
9. Charger connect
Safety Notes
• The product is intended for private, non-commercial use
only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits
given in the specifications.
• Do not open the device or continue to operate it if it
becomes damaged.
• Since the battery is integrated and cannot be removed,
you will need to dispose of the product as a whole. Do
this in compliance with the legal requirements.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
Warning - Battery
• Only use suitable charging devices or USB
connections for charging.
• As a rule, do not charge devices or USB connections
that are defective and do not try to repair them
yourself.
• Do not overcharge the product or allow the battery to
completely discharge.
• Avoid storing, charging or using batteries in extreme
temperatures.
• When stored over a long period of time, batteries
should be charged regularly (at least every three
months).
2
Warning - High volumes
• Using this product impairs your ability to perceive
ambient noises. For this reason, do not operate
vehicles or machinery while using the product.
• Always keep the volume at a
reasonable level. Loud volumes,
even over short periods, can
cause hearing loss.
• Be considerate. Loud volumes can have a detrimental
effect on your surroundings.
Basic operation
1. Adjust the volume:
Press volume up or down button during a call or while
listening to music.
2. EQ equalizer adjuster:
Press EQ button to change the EQ mode (original, bass,
treble, rock, pop)
3. Multifunction button:
For operations included turn on/off, pairing, answer/end
calls, music play/pause etc.
4. Track back / Forward:
To enable music track back/forward, and scrolling through
the current song.
5. Indicator lights:
When the headset start pairing, the red and blue lights
flash alternately; red light flashes once when the headset
is turned off; blue light flashes in every 8 seconds when
in standby status; the blue light flashes continuously
when there is incoming calls; the red indicator light keeps
lighting when the headset is charging; the red light is off
and blue light is on after fully charged.
Pairing
• Press and hold the multifunction button about 5 seconds
to switch on the headset, it automatically enters the
pairing mode, the red and blue indicator lights flashes
alternately.
• Activate the Bluetooth feature on your phone or other
devices, and set it to search for new Bluetooth devices.