Inhaltsverzeichnis
Werbung
Fault code
Possible causes
The
appliance
Electrical circuit
stops
interrupted
working
Fault
Lack of water in the
installation
(< 0.5 bars)
Excess water in the
installation
xx
Fault
0020085232_01 - 03/10 - Saunier Duval
0020085232_01 - 03/10 - Hermann
0020085232_01 - 03/10 - Glow-worm
0020085232_01 - 03/10 - Bulex
0020085232_01 - 03/10 - AWB
0020085232_01 - 03/10 - Protherm
¿NECESITA ASISTENCIA TÉCNICA?
BENÖTIGEN SIE TECHNISCHEN SUPPORT?
Solution
Check that there is no power cut and that the appliance is
correctly connected. When electrical power comes back
on, the appliance automatically comes back into service.
If the fault persists, contact your Installation/Servicing
company or Glow-worm Service.
Press on the "reset" button. Wait for 5 seconds. If the fault
persists and the symbol
Installation/Servicing company or Glow-worm Service.
Open the filling tap located under the appliance until
you obtain a pressure of between 0.8 and 1.2 bars on
the indicator, refer to diagram overleaf. If refilling needs
to be carried out too often, there may be a leak in your
installation. In this case, contact your Installation/Servicing
company or Glow-worm Service, to have your system
checked.
With central heating off, open the vent (bleed screw) on a
radiator to allow water to escape and reduce the pressure
in the heating circuit, or contact your Installation/Servicing
company or Glow-worm Service.
Contact your Installation/Servicing company or Glow-
worm Service.
BISOGNO DI ASSISTENZA?
BISOGNO DI ASSISTENZA?
POTREBUJETE POMOC?
ANY ASSISTANCE ?
ANY ASSISTANCE ?
ANY ASSISTANCE ?
BESOIN D'AIDE ?
BESOIN D'AIDE ?
HULP NODIG ?
HULP NODIG ?
xx
appears, contact your
- 13 -
Werbung
Inhaltsverzeichnis
