Heinner VMGB001 Anleitung Seite 4

Wear protective helmet, eye and
ear protection!
Protective gloves must be worn!
Wear safety shoes!
Danger of kickback!
Beware of flying objects!
Keep other people away from
your work area
No open flame
Hot surfaces – do not touch!
PROPER USE
This machine is designed for clearing grass, small
bushes and undergrowth. The brush cutter is more
robust and stronger than an electric grass trimmer.
The denser the vegetation you have to clear, the
more powerful the machine you need.
Technical data
Displacement: 52CC
Engine type: Single cylinder, air-forced cool, 2
stroke
Rated output power: 1.65kw/2.2HP
Fuel tank capacity: 1200ml
Oil/Fuel mixture ratio: 1:25
Shaft length: 1500mm
Shaft diameter: 26mm
Blade type: Metal blade & Nylon cutter
Accessories: nylon blade/3 teeth metal blade
Guaranteed sound power level LwA: 113dB(A)
Tool description
1 Fuel Tank
2 Rewind Starter
3 Air Cleaner
4 I-O Switch (on/off)
5 Spark Plug
6 Exhaust Muffler
7 Handle
GASOLINE GRASS TRIMMER
8 Control Lever
9 Control Cable
10 Shaft
11 Protector
12 Gear Case/Head Case
13 Cutter Blade
14 Shoulder Strap
15 Fuel Filter Cap
16 Starter Knob
17 Primer Pump
18 Choke Lever
19 Exhaust Pipe
21 Flexible Pipe
22 Grip
Before starting the equipment
Insert on end of a flexible pipe (1) into a clutch
housing (2) on an engine until it locks with a slight
"click" noise.
Insert the other end of the flexible pipe into a pipe
case (3) holder of a brushcutter until it locks.
Each end of the flexible pipe is interchangeable.
Make sure that a square end of a flexible shaft fits
into the joint of a drive shaft.
3