Phonocar VM 016 Montageanleitung Seite 58

Electrical Connections
Using the ISO Connector
1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.
2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting,
incorrect connection may cause serious damage to this unit. Cut the connector, connect the colored leads
of the power cord to the car battery, as shown in the colour code table below for speaker and power cable
connections.
Location
Connector A
1
2 Telephone-mute/pink
3
4 ACC+/red
5 ANT/Amp control/blue
6
7 Battery 12V(+)/yellow
8 Ground/black
Function
Connector B
Rear Right (+) - Purple
R ear Right (-) - Purple / Black Stripe
Front Right (+) - Gray
F ront Right (-) - Gray / Black Stripe
Front Left(+) - White
F ront Left(-) - White / Black Stripe
Rear Left (+) - Green
R ear Left (-) - Green / Black Stripe
58