Output Connections - AUDAC CAP412 Benutzerhandbuch

Output connections

The loudspeaker output connections are performed using Euro- Terminal Blocks, and provide the
possibility for connecting low impedance (4 Ohm) loudspeakers as well as high impedance (100V /
70V) loudspeakers.
The table below shows the impedance and output voltage for each power tap.
CAP412
When connecting the loudspeakers, always maintain proper polarity on the output connectors.
Connect the COM terminal to the negative (-) speaker lead and connect the other suitable terminal
to the positive (+) speaker lead.
Low impedance applications:
When using the CAP412 amplifier in low impedance applications, the loudspeakers should be
connected between the "COM" and "4 Ohm" connection terminals.
4Ω / 22V 41Ω / 70V
+
-
4 Ω
+ +
- -
8 Ω 8 Ω
10
83Ω / 100V