Output Connections - AUDAC DPA153 Handbuch

Output connections

The loudspeaker connections for every output channel are performed with a two pin Euro-
Terminal block connector. On the Left side is the output connector of the Subwoofer channel
provided, while on the right channel both output connectors for the Left & Right Satellite channels
are provided.
1) Stereo Mode:
Stereo mode will be the most commonly used operation method for this amplifier.
The Satellite loudspeakers should be connected to the "Left & Right" Euro-
Terminal block output connectors, while the subwoofer should be connected to
the "Sub" Euro-Terminal block connector. Depending of the position of the
"Crossover mode switch", the signal which is available on the Left & Right
outputs can be determined. For a more detailed description of the "Crossover
mode switch" see "Rear panel overview" on page 7 of this user manual.
11