KAL-FIRE Fairo ECO-prestige Montageanleitung Seite 166

15.2 Unblocking the fire after a code 'A' failure (e.g. 08A)
Press the button around 5 times, until the 'A' code disappears. A
new ignition attempt can then be tried. (Hold down the button
until 'OK' begins to flash at the top left of the screen.)
15.3 Unblocking the fire after a code 'F' failure (e.g. 08F)
After a period of 24 hours, the burner will unlock automatically. If the power to the
appliance is turned off, this safety measure will not be triggered. This is strictly forbidden
and could put your safety at risk!
62