Operating Manual; Connecting The Keyboard; Adjusting The Volume - Cherry MX BOARD 6.0 Bedienungsanleitung

OPERATING MANUAL

CHERRY MX BOARD 6.0 – Corded Aluminium Keyboard
Congratulations ...
CHERRY has been developing and producing
innovative input systems for computers since
1967. You will now be able to feel the difference
GB
in quality, reliability and design with your new
favourite piece of equipment.
Always order original CHERRY equipment.
Your CHERRY MX BOARD 6.0 particularly
stands out due to the following features:
•
• Precise response of the
legendary CHERRY MX key
modules, which you can still feel
after 50 million key strokes. The
modules are entirely developed and
manufactured in Germany.
•
• CHERRY Real Key technology:
extremely fast and complete
processing of key commands
(full N key roll-over).
No ghost key effect, even with the most
complex key combinations.
• Win-Key lock: Windows keys can be
deactivated
• Keys backlit with red LEDs
• Frame and housing are a robust, single
aluminium casting
For information on additional products,
downloads, and much more, please visit
www.cherry.de.
8
1 Connecting the
keyboard
1 Run the cable in one of the ducts on the
underside of the keyboard so that it comes
out of the keyboard on the left, the middle or
the right.
2 Connect the keyboard to the USB port of the
PC/laptop.
The keyboard is ready to use without
installing any software.
2 Attaching the palm rest
NOTE: The magnet in the keyboard
can wipe storage media and
damage mechanical watches
There is a magnet of strength
N48H on the front of the keyboard
for attaching the palm rest..
• Do not put any storage media such as SD
cards or external hard drives, or
mechanical watches near the front of the
keyboard.
• Push the projecting metal part of the palm
rest into the recess below the space bar on
the keyboard.

3 Adjusting the volume

The symbols for adjusting the volume are
secondary functions of F1 to F3.
To make multiple adjustments: see
5 "Activating/deactivating the FN key".
• To adjust the volume, press the FN key and
the appropriate key as shown in the table.
Example:
To switch the sound on or off, press the FN
key and F1 ( ).
The keyboard saves the setting.
The keys have the following functions:
Key Function
Sound on/off
Volume down
Volume up