Connect The Cables - Axis Q8741-E Sicherheitsanweisungen

AXIS Q87 Bispectral PTZ Network Camera Series

Connect the cables

1. Loosen the four lid screws (T20) and remove the lid.
1
Input power connector
2
I/O connector
3
RJ45 connector
4
SFP slot for SFP module (SFP module not included)
2. Connect the network (optical fibre and/or RJ45), I/O and power cables. For more
information on different network connectivity options, see Install the network link on
page 21.
22