Optional Accessories; Dust Extraction; Protecting The Environment - DeWalt DW876 Originalanweisungen

ENG LI SH
Transporting (Fig. A1)
WARNING: To reduce the risk of injury, turn unit off
and disconnect machine from power source before
installing and removing accessories, before adjusting
or changing set-ups or when making repairs. Be sure
the trigger switch is in the OFF position. An accidental start-
up can cause injury.
The castor wheels (20) are provided for easier transport of the machine.
Use the carrying handle (19) to transport the machine.

Optional Accessories

WARNING: Since accessories, other than those offered
by D WALT, have not been tested with this product, use
E
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
Consult your dealer for further information on the appropriate
accessories.

Dust Extraction

WARNING: Whenever possible, connect a dust extraction
device designed in accordance with the relevant regulations
regarding dust emission.
Connect a dust collection device designed in accordance with the relevant
regulations. The air velocity of externally connected systems shall be
20 m/s +/- 2 m/s. Velocity to be measured in the connection tube at the
point of connection, with the tool connected but not running.
Range of Bandsaw Blades Available
RECOMMENDED BLADES
OVERALL LENGTH 2215 mm
Type of blade Pitch (mm)
DT8470QZ 1.8
DT8471QZ 4.2
DT8472QZ 4.2
DT8473QZ 6.4
DT8474QZ 1.4
DT8475QZ 1.4
DT8476QZ 1.8

Protecting the Environment

Separate collection. This product must not be disposed of
with normal household waste.
Should you find one day that your D
or if it is of no further use to you, do not dispose of it with household
waste. Make this product available for separate collection.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of
recycled materials helps prevent environmental pollution
and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical
products from the household, at municipal waste sites or by the retailer
when you purchase a new product.
D WALT provides a facility for the collection and recycling of D
E
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by
contacting your local D WALT office at the address indicated in this
E
manual. Alternatively, a list of authorised D
full details of our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
24
WALT, recommended
E
Width (mm) Usage
4.0 Wood – Fretsaw blade
6.0 Wood – Contour / Scroll
10.0 Wood – Rip & Cross cutting
16.0 Wood – Fast rip cut
20.0 Wood – Fast rip cut; thick wood
6.0 Metal – Non-ferrous – thin steel
12.0 Metal – Non ferrous – thick steel
WALT product needs replacement,
E
WALT repair agents and
E
D WALT is confident of the quality of its products and offers an
E
outstanding guarantee for professional users of the product.
This guarantee statement is in addition to and in no way
prejudices your contractual rights as a professional user or
your statutory rights as a private non-professional user. The
guarantee is valid within the territories of the Member States of
the European Union and the European Free Trade Area.
If you are not completely satisfied with the performance of your
D WALT tool, simply return it within 30 days, complete with all
E
original components, as purchased, to the point of purchase,
for a full refund or exchange. The product must have been
subject to fair wear and tear and proof of purchase must be
produced.
If you need maintenance or service for your D
the 12 months following purchase, you are entitled to one
service free of charge. It will be undertaken free of charge at
an authorised D
be produced. Includes labour. Excludes accessories and spare
parts unless failed under warranty.
If your D
E
materials or workmanship within 12 months from the date of
purchase, D
free of charge or – at our discretion – replace the unit free of
charge provided that:
• The product has not been misused;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorised
persons;
• Proof of purchase is produced.
• The product is returned complete with all original
components
If you wish to make a claim, contact your seller or check the
location of your nearest authorised D
the D WALT catalogue or contact your D
E
address indicated in this manual. A list of authorised D
repair agents and full details of our after-sales service is
available on the Internet at: www.2helpU.com
WALT
E
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
• ONE YEAR FREE SERVICE CONTRACT •
WALT repair agent. Proof of purchase must
E
• ONE YEAR FULL WARRANTY •
WALT product becomes defective due to faulty
WALT guarantees to replace all defective parts
E
WALT repair agent in
E
WALT tool, in
E
WALT office at the
E
WALT
E