Notes On Recording; ª To Protect An Md Against Accidental Erasure - Tascam MD-350 Bedienungsanleitung

Notes on Recording

ª To protect an MD against
accidental erasure
... After recording an MD, slide the record-
protect tab to open the hole.
... To record on the MD again, slide the tab
to close the hole.
ª When "Disc Full !!" or "Track
Full !!" is displayed
The MD has no more available space for
recording or the MD has used up all its
track numbers. Erase unnecessary tracks
or record music on another MD.
ª The way track numbers are
assigned varies depending on
the source
When a CD or MD is played and recorded
digitally by selecting [DIGITAL 1/2] with
the [INPUT SELECTOR]:
... Track numbers on the recorded MD are
assigned to match those on the source
CD or MD. However, in the circum-
stances listed below only one track
number may be assigned to a recorded
section.
·
A section composed of the repeated
playback of a single track on a disc
(e.g. using single track repeat
playback).
· A section composed of the succes-
sive recording of tracks with the
same track number from more than
one disc. Also, if the source is an
MD, track numbers may not be
marked for tracks shorter than 3
seconds.
– 9 –
When the source is recorded with
[ANALOG] or when a digital source other
than a CD or MD is recorded with
[DIGITAL 1] or [DIGITAL 2] while the Auto
Track function is OFF:
... The entire recording may be counted as
a single track with only one track
number assigned to it.
·
Track numbers can be assigned
manually at the desired points by
º
pressing the [ RECORD] button
during recording.
·
Track numbers can be assigned
automatically by switching the Auto
Track function to "A_TRACK > ON"
before starting recording.