Useful Tips For Playback; Using The Display Window; Selecting The Desired Track; Playing Tracks In Random Order (Shuffle Playback) - Tascam MD-350 Bedienungsanleitung

Useful Tips for Playback

Buttons used on this page

Using the Display Window

The information shown on the display
allows you to check the disc title, track
title, the total track number in an MD, total
playing time, remaining recordable time of
the MD.
... Each press of the [DISPLAY] button
changes the display as shown below.
In the Stop mode:
In the Play mode:
... The total number of tracks appears on
the TRACK NO. display.
... The disc title and track titles are
displayed only when they have been
recorded onto the MD.
... When a track has been selected in the
Stop mode ("TRACK" is lit), pressing the
[DISPLAY] button displays the track title.
... When a track title is composed of more
than 100 characters, the 100th character
and beyond cannot be displayed.
... The disc or track title can be scrolled on
the display with the [SCROLL] button on
the remote control unit. After scrolling,
the title returns to its original display.

Selecting the Desired Track

ª Playing a track by direct search
Specify the desired track by pressing the
numeric buttons (1 to 9, 0, +10) on the
remote control unit. The specified track
starts to play.
... Examples of operation for direct search
of track number 10 or more:
To search track number 10:
Press +10 once then 0.
To search track number 25:
Press +10 twice then 5.
... Press the [CLEAR] button while "TRACK
NO." is blinking to cancel it.
ª To skip to the previous or next track
µ ≤
Turn the [ TRACK ] dial clockwise
or counterclockwise (or press the
µ ≤
[ TRACK ] buttons on the remote
control unit) during playback to skip to a
track located after or before the current
track.
ª To search a desired section
During playback, press and hold the
∆ ˚ ∆ ˚
[ / ] (or [ SEARCH ]) buttons to
search the desired section.
... In the Play-Ready mode, the desired
section can be searched by observing
the elapsed playing time or remaining
playing time on the display.
... Normal search may not be possible if
there are several successive short
tracks of only a few seconds in length.
Playing Tracks in Random Order
(Shuffle Playback)
Each track on the disc is played once in
random order.
– 13 –
1. In the Stop mode, press the [PLAY
MODE] button repeatedly until "SHUFFLE
MODE" is displayed ("
up).
¥
2. Press the [ PLAY] button.
... To play the next track, turn the
µ ≤
[ TRACK ] dial clockwise (or press
≤
the [ ] button on the remote control
unit) during shuffle playback.
... To play from the beginning of the
µ
current track, turn the [
dial counterclockwise (or press the
µ
[ ] button on the remote control unit)
during shuffle playback.
... The Shuffle mode will not be canceled
even when the power is turned off.
... To cancel the Shuffle mode, press the
[PLAY MODE] button repeatedly until
"CONTINUE MODE" is displayed.

When Recording to Analog Tape

ª
To play tracks with spaces inserted
after every track (Auto Space playback)
The Auto Space playback function inserts
a 3-second blank space between each
track. This makes possible music scan
operations when recording from MDs to
analog tape.
1. Press the [AUTO SPACE] button on the
remote control unit once so that
"A_SPACE ON" is displayed. ("
" lights up.)
¥
2. Press the [ PLAY] button.
... To release Auto Space Playback, press
the [AUTO SPACE] button repeatedly
until " " disappears.
ª
To pause after each track
(Auto Ready playback)
The deck can enter the Ready mode after
playing each track. This feature is
convenient when copying a single MD
track onto tape or when the tracks to be
copied are not continuous.
1. Press the [AUTO SPACE] button on the
remote control unit twice so that
"A_READY ON" is displayed.
(" " lights up.)
" lights
≤
TRACK ]