Operation - Velleman PCMP30 Bedienungsanleitung

• Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
4. Features
• pre-charged and ready to use
• environmentally friendly and rechargeable: can be used again and again
• easy to use: just plug it in for instant power
• lightweight: compact size, portable and easy to handle
• 4 LED indicators: for battery strength and charging status
• with power button: to prevent self-discharge of the cell
• automatic shut-off after 25 seconds: to avoid power loss when not
in use
• safe and reliable: temperature control, overload and short circuit
protection.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 IN: power input port
2 on/off button
3 indicator LEDs

6. Operation

Charging the Power Pack
Important: Before the first use, make sure that you FULLY charge
the power pack using the included USB cable.
1. Disconnect any devices from the power output port (OUT) [4].
2. Plug the micro-USB connector [5] of the included USB cable into the
power input port (IN) [1] of the power pack.
3. Plug the USB connector [6]:
into a USB port of your computer
o
or into the USB port of your standard iPhone/iPad USB power
o
adapter (or a compatible USB power adapter) and connect the
adapter to a wall socket.
The power pack starts charging. The indicator LEDs [3] show the
charging status (see illustration A). When the power pack is fully
charged, all LEDs are on (not blinking).
4. As soon as the power pack is fully charged, unplug the USB cable.
The power pack is now ready for use.
Tips for Optimal Power Pack Lifetime
• Do not leave the power pack charging for very long periods of time.
Unplug it as soon as possible from the computer or power adapter.
V. 02 – 28/09/2012
PCMP30
4 OUT: power output port
5 micro-USB connector
6 USB connector
4 ©Velleman nv