Assigning A Number To A System (Role Menu); Setting The Systems In Conference Mode (Encryption Procedure) - Adeunis RF VOKKERO Squadra Bedienungsanleitung

5.2. Assigning a number to a system (Role menu)
To set up a conference, firstly you have to identify all the devices that will be taking part and give them a number
(role). A conference may be established between 2 to 6 devices, which will be identified by a number ranging from 1
to 6.
Note 1: One of the devices absolutely must have the number 1.
Note 2: Do not assign the same number to several devices, as this will prevent the conference from running smooth-
ly.
Procedure:
• In the main menu, click on the "Role" icon.
• A window will open, asking you to select the terminal that a role number must be assigned to. Click on the "OK"
button.
• Using the stylus, select the communication channel by clicking on it.
• A window will open, in which the terminal selected will be displayed.
• Using the "+" and "-" buttons, modify the role number (from 1 to 6 or "Listener" for a listening-only mode).
• Once the number has been selected, click on the "OK" button in order to validate it, or on "Escape" in order to
exit from the sub-menu.
When the "OK" button has been clicked on, a window will appear confirming that the operation has been duly comple-
ted.
• Click on "OK" to return to the home screen.
5.3. Setting the systems in conference mode (encryption procedure)
Principle: In order to communicate in secure mode, the devices must save an encryption key provided by the configu-
rator.
This operation is required in order to enable all the devices to take part in a conference in secure mode.
IMPORTANT NOTE
In encrypted (secure) mode, a device cannot communicate with a system if the encryption procedure has not been
carried out. If you want to add a terminal to an existing system, you absolutely must carry out this procedure with all
the system's devices (including devices configured in Listener mode).
Make sure that each of the following criteria are fulfilled before starting the operation:
• All the devices must use the same channel.
• Only one device should have the ID 1.
Procedure:
• In the main menu, click on the Encryption icon.
• The Network Encryption sub-menu will appear and enable you to select two types of procedures: Launch Encryp-
tion and Remove Encryption. Click on the "Launch Encryption" icon.
• A window will open and ask you to confirm the launching of this procedure.
• Click on "Yes".
208407A-V1.4-UG-VOKKERO-SQUADRA_CEE_REFEREES
39