Axis V5915 Installationshandbuch Seite 17

3. Drill a 7 mm (9/32 in) hole in the ceiling tile.
4. Remove the tripod screw from the mounting bracket.
5. Attach the short end of the threaded rod to the camera and tighten.
6. Assemble the camera, ceiling tile and the mounting bracket and tighten the nut.
1
Camera
2
Ceiling tile
3
Threaded rod
4
Mounting bracket
5
Nut
6
Tripod screw
7. Route and connect all cables to the camera.
NO TICE NO NO TICE TICE
Be careful not to stretch or bend the cables too much. This could cause damage to the
cables.
8. Connect the power supply to a mains power outlet (100–240 VAC).
9. Install the ceiling tile with the camera mounted on it.
Connect the Camera to a Monitor
If the monitor supports the maximum resolution of the camera, just connect the monitor without
adjusting any settings.
1 2 3
17
AXIS V59 Series
6
5
4