Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Cleaning - Oase biOrb AIR 60 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für biOrb AIR 60:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
- EN -

MAINTENANCE AND CLEANING

Area
Tasks to be carried out
Water
Check the water level 1 × once per
week. (→ Planting up the coir com-
post)
Filter cartridges
Replace every 3 months. (→ Chang-
ing the filter cartridge)
Automatic misting
Top up the humidimist when the
unit
lighting signals that this is necessary.
(→ Messages/displays)
Cleaning the tank
As required.
Changing the filter cartridge
How to proceed:
 L
1. Remove the cover of the filter cartridge.
2. Remove the used filter cartridge.
3. Insert a new filter cartridge.
Cleaning
N O T E
To ensure that the acrylic remains transparent and is
not scratched:
• Do not use household cleaning agents. Clean as de-
scribed below.
• Only use micro-fibre cloths.
OASE recommends: OASE biOrb high-gloss polish &
micro-fibre cloth (46033).
How to proceed:
1. Wipe the container cover and outside of the cover
ring with a damp cloth.
2. Screw the spray attachment onto one of the Hu-
midiMist bottles.
3. Spray the inside of the container with HumidiMist.
The spray attachment sprays in any position.
4. Use a cleaning cloth to clean the inside of the con-
tainer.
22
Cleaning the water level indicator
How to proceed:
 M
1. Pull off the hose of the water level indicator.
2. Fit the water level cleaner onto the hose.
3. Squeeze the water level cleaner.
4. Refit the hose.
Removing the cover
The cover is fastened to the container by a bayonet
catch.
• Disconnect the plug of the power supply if neces-
sary.
• Remove the container of the automatic misting
unit. (→ Removing/inserting the automatic misting
unit)
How to proceed:
 N
1. Turn the cover counter-clockwise as far as the stop.
2. Remove the cover.
Fitting the cover
Prerequisite
• The automatic misting unit has been removed.
How to proceed:
 O
1. Place the cover on the container and open the
cover.
2. Turn the cover until the grooves in the cover are lo-
cated in the recesses at the edge of the container.
3. Turn the cover clockwise up to the stop.
DISPOSAL
N O T E
This unit contains electronic components - do not dis-
pose of this unit with domestic waste!
• Render the unit unusable by cutting off the cables.
• Dispose of the unit by using the return system pro-
vided for this purpose.
biOrb AIR 60

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis