Frequently Asked Questions (Faqs) - MADRIX LUNA Kurzanleitung

Frequently Asked Questions (FAQs)

What do the blinking LEDs on the front of the device mean?
Please read the chapter 'Description Of Status LED Codes' on page 5.
How can I change the IP address?
You can use the web configuration interface as described on page 7.
The current IP address cannot be reached. What can I do?
You could perform a reset to factory default settings as described on page 7.
Does the device support RDM?
No. RDM is not supported by MADRIX
Is it possible to use more than one MADRIX
Yes. Multiple devices can be used together to control larger LED projects.
Art-Net is recommended for large projects. Use suitable network components
to create a network and connect the devices to a network switch.
Where do I activate the Sync Mode?
The Sync Mode is only available when used with MADRIX
under 'Preferences...' à 'Device Manager...' à 'Art-Net' à 'Sync...'.
Can I use other controllers apart from MADRIX
Yes. When using MADRIX
it in combination with other software applications, consoles, and controllers.
Do I need a MADRIX
If you want to use MADRIX
and sold separately.
Can I repair MADRIX
No. Do not attempt any repairs. Any attempt will void your warranty!
Please contact your dealer or supplier if the device seems to be defective.
What can I do if my unit does not work anymore during the warranty
period?
Please contact your dealer or supplier.
13
LUNA as a standard Art-Net node, you can use
®
LUNA and a MADRIX
®
, yes. The MADRIX
®
LUNA myself?
®
LUNA.
®
LUNA?
®
to control fixtures?
®
KEY?
®
software license is necessary
®
. It can be activated
®