ECG PMP 20 Bedienungsanleitung Seite 73

Recording in the Record mode
1. Open the main menu and using the button
Record.
2. Press the button Mode to confirm the Record mode
(recording).
3. Press the button
Note: Only the button
during recording.
Data stream of the recording
1. You can open the submenus when the record mode stops by
pressing the button Mode.
2. Use the button
Mode to confirm it. The available options are: 32 kbit/s,
64 kbit, 128 kbit, 192 kbit/s and 384 kbit/s.
3. Press to start recording.
u
Playback of recordings
1. Open the main menu and use the button
to select the item Voice.
2. Press the button Mode to confirm the
playback mode.
3. Press the button
4. Using the buttons I
Setting
You can change setting of various functions of the player in this
item. Individual options may vary slightly from the firmware
version guide.
1. Open the main menu and use the button
to select the item Setting.
2. Press the button Mode to confirm the
setting mode.
to start recording.
u
and the function A-B are active
u
I to select the item "Record type" and press
B
to start the playback.
u
I you can go to previous/next track.
/
b B
I select the item
B
I
B
I
B
GB
73