Werbung
Verfügbare Sprachen
Verfügbare Sprachen
F it t in g In s t r u c t io n s
AC Schnitzer Rear Skirt Extension - F10 / F11 -
3. Fitting the AC Schnitzer Rear Skirt Extension
Fig.1 + Fig.2
Cut out standard rear skirt along cut line (1) using a pneumatic
saw or similar.
Important!
Do not cut out above groove (2)!
Then transfer dimensions to the right-hand side (3) and make
the second cut-out accordingly.
2
Fig.2a
Important!
On vehicles with trailer coupling, before painting the area
marked in the rear skirt trim (1) must be cut out with a
pneumatic saw or similar.
Bore out the predrilled holes (2) onto Ø6mm.
Note!
Components and surfaces to be glued together must first
be thoroughly cleaned with cleaner!
Fig. 3
Remove paint residue from the adhesive grooves (1), sand
down and clean using the cleaner supplied.
Fig.4
Apply adhesive as a 5 mm bead (1) along the adhesive
grooves (2).
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
1
Fitting Instructions No.: 5112 210 110 / Mpu / Issue: 29.09.2011
6
3
1
1
2
1
Fax -135
2
Werbung
