Memory Options - Num'axes SL1008 Gebrauchsanleitung

Special Requirement in the use of the batteries
WARNING: Do not use different voltage lead acid
battery other than the one specified in this section.
Doing so will damage the camera and will void the
warranty.
Do not mix old and new batteries. Do not mix alkaline,
standard, or rechargeable batteries.
WARNING: ALWAYS have the camera in the OFF
position when installing or removing batteries and
memory card. Removing batteries or memory card
while the camera is ON may damage the product.
12V DC external power
The camera is equipped with an external power jack designed to
accept a barrel plug cable of DC 12V adaptor or battery pack
(not supplied).
•
Make sure camera is in the OFF position.
•
Insert the barrel plug of external AC to DC power adaptor
or battery pack into the DC 12V port on the bottom of
camera housing.
•
Sliding the switch to SET or A or B or MANUAL from OFF.

Memory Options

The camera is also equipped with an expandable media card slot
capable of accepting up to 32GB SD card with Class 10 or below
speed rating (not supplied). The status display will show the
SL1008 - Indice A 50/200