Battery And Memory Installation - Num'axes SL1008 Gebrauchsanleitung

•
recording time during setting or quantity of captured
image/video.
Factory Default Settings
Time Out: 30 Seconds
Burst Mode: 3 Still Images per trigger (3P)
Photo resolution: 3M
Operation Mode: PIR
Video Mode: video length 10 Seconds - resolution 720P
Time lapse Mode setting: time frame 19:00 to 07:00 the next
day, Time out 60 Seconds, Resolution 12M, 1 Still Image per
trigger (1P).

Battery and Memory Installation

Your camera is designed to operate using two different types of
power options.
NOTE: be sure the camera is in the OFF position before
inserting or removing SD cards or batteries.
"AA" Batteries
The internal battery tray accepts 8 "AA" batteries. Be sure to
use high quality alkaline batteries (you can purchase NUM'AXES
batteries from NUM'AXES or from your distributor). Install the
batteries with correct polarity (+/-) as noted inside the battery
tray.
WARNING: when changing the batteries, the time and
date setting is lost.
SL1008 - Indice A
: It indicates the date/time/time out and video
49/200