Num'axes PIE1028 Gebrauchsanleitung Seite 42

9. USB connection
When the unit is connected via USB, press the LEFT button until the red
indicator light comes on; then the interface below appears:
Press the LEFT button to choose DC (power) or PC (computer) connection.
Press the RIGHT button to confirm your choice.

DC connection for power supply
The device enters Test mode.

PC connection to read the micro SD card
The LCD screen of the device shows the interface below. You can now read
the contents of the micro SD card via your computer.
By pressing the RIGHT button again, you will turn the camera into a
webcam. The LCD screen will show the interface below. Press the RIGHT
button again to exit.
PIE1028 – indice A – avril 2018 42/120